ONLINE SHOP

Fox

You are in: Products Rotary limit switches Fox

Technical characteristics

  • Conformity to Community Directives: 2014/35/UE 2006/42/CE
  • Conformity to Standards: EN 60204-1 EN 60204-32 EN 60947-1 EN60947-5-1 EN 60529
  • Regulations for the prevention of accidents BGV C 1 (only for Germany)
  • CAN/CSA-C22.2 No 14-13
  • UL 508
  • IEC 61508:2010 Part 2-4-6-7
  • Storage ambient temperature: -40C/+80C
  • Operational ambient temperature: -40C/+80C
  • Protection degree: IP 66 / IP 67 / IP 69K
  • NEMA Protection degree: Type 4X*
  • Insulation category: Class II
  • Rotation speed: revolution ratios ≥1:16: max. 800 rev./min. revolution ratios <1:16: max. 200 rev./min. revolution ratios =1:50 and 1:100: max. 1500 rev./min.
  • Cable entry: cable clamp M20, M20+M16, M20+M20
  • HALT test (data available on request)
  • Markings and homologations: CE cULus* SIL 1 EAC
  • Utilisation category: AC 15 / 250 Vac / 3 A
  • Rated thermal current: 10 A
  • Rated insulation voltage: 300 Vac
  • Mechanical life: 10x106 operations
  • Connections: screw-type terminals with self-lifting pads
  • Markings and homologations: CE EAC cULus

Technical characteristics

    General specifications
  • Conformity to Community Directives: 2014/35/UE 2006/42/CE
  • Conformity to Standards: EN 60204-1 EN 60204-32 EN 60947-1 EN60947-5-1 EN 60529
  • Regulations for the prevention of accidents BGV C 1 (only for Germany)
  • CAN/CSA-C22.2 No 14-13
  • UL 508
  • IEC 61508:2010 Part 2-4-6-7
  • Storage ambient temperature: -40C/+80C
  • Operational ambient temperature: -40C/+80C
  • Protection degree: IP 66 / IP 67 / IP 69K
  • NEMA Protection degree: Type 4X*
  • Insulation category: Class II
  • Rotation speed:
    revolution ratios ≥1:16: max. 800 rev./min.
    revolution ratios <1:16: max. 200 rev./min.
    revolution ratios =1:50 and 1:100: max. 1500 rev./min.
  • Cable entry: cable clamp M20, M20+M16, M20+M20
  • HALT test (data available on request)
  • Markings and homologations: CE cULus* SIL 1 EAC

    Specifications of the microswitches
  • Utilisation category:
    AC 15 / 250 Vac / 3 A
  • Rated thermal current: 10 A
  • Rated insulation voltage: 300 Vac
  • Mechanical life: 10x106 operations
  • Connections: screw-type terminals with self-lifting pads
  • Markings and homologations: CE EAC cULus

Description

Rotary limit switch used to control and measure the movement of industrial machines by measuring the rotation angle and/or counting the number of revolutions of a shaft.
Fox is used on wind turbines to control the position of the nacelle or the pitch angle of the blades.
Features
- It consists of a gear motor that transfers movement to the cams and the other movement detection devices through a primary input reduction stage (worm gear and helical toothed gear) and one or more secondary output stages (pairs of straight toothed gears).
- Accurate adjustment of cams by means of screws.
- Positive opening NC contacts for safety functions.
- Mechanical life of switches: up to 10 million operations.
- IP protection degree: Fox is classified IP66, IP67 and IP69K.
- NEMA protection degree: Fox is classified Type 4X*.
- Extreme temperature resistance: -40C to +80C.
- It features transmission and gear driving shafts made of stainless steel AISI 430F or AISI 303. worm gear transmission shaft rotating on ball bearings, self-lubricating technopolymer gears and driving bushes, technopolymer base and cover.
- All materials and components used are wear resistant and guarantee protection of the unit against water and dust.
Options
- Revolution ratios from 1:3 to 1:2870. achieved by combining different secondary output stages.
- Snap action switches with 1NO+1NC change-over contacts or slow action switches with 1NC contact.
- It can be equipped with a cam set (with up to 5 switches) and potentiometers, encoders. Yankee absolute encoders.
- Dedicated cable clamps or connectors.
- Available with anti-moisture plug fitted to the base by means of a lock nut, to improve transpiration for the limit switch whilst maintaining protection against water.
- Available with flanges, pinions and couplings.
- Plates with universal adapter to replace existing systems.
Certifications
- CE marking, cULus* marking and EAC certification.
- Fox is available, upon request, with the SIL1 certification (Safety Integrity Level 1), according to Standard IEC61508.
- Complies with accident prevention regulation BGV C 1 (only for Germany).
- HALT TEST (Highly Accelerated Life Test) passed. simulating conditions largely exceeding standard operating conditions.


* Not available on all versions.

Configure your rotary limit switch

Model
TER Tecno Elettrica Ravasi srl
Manufactured by: TER Tecno Elettrica Ravasi srl
Model: Rotary limit switches Fox
Product ID: 82
TER Tecno Elettrica Ravasi srl
Sede Operativa / Headquarter
Via Garibaldi 29/31
23885 Calco (LC) - Italy
Tel. +39 039 9911011
Fax +39 039 9910445
E-mail info@ter.it
Sede Legale / Registered Office
Via San Vigilio 2 - 23887 Olgiate Molgora (LC) - Italy
Capitale sociale / Capital stock € 150.000
R.E.A Lecco N. 136104 - M.I.C. 001225
Registro Imprese di Lecco / Business register in Lecco
C.F P.IVA / Fiscal Code/VAT no. 00222410136
Do you want receive TER news updates?