Brick
Technical characteristics
- Conformity to Community Directives: R&TTE 99/05/CE (Annex III) LVD (2006/95/CE).
- Conformity to CE Standards: EN 301 489-3 EN 300 220-2 EN 60950-1 EN 60204-32 EN 13557 EN 61000-6-2 EN ISO 13849-1:2006
- Ambient temperature storage: -20°C/+70°C
- Ambient temperature operational: -20°C/+70°C
- Frequency: 433 MHz 870 MHz 418 MHz for China
- Hamming code: > 4
- Maximum no. of simultaneous on/off controls: 10
- Response time: 45 ms
- Active Emergency/Stop response time: 45 ms
- Passive Emergency response time: 1 s
- Operating range: 10 m
- Stop control classification: Category 3 PL-D
- Markings and homologations: CE
Technical characteristics
-
General specifications
- Conformity to Community Directives: R&TTE 99/05/CE (Annex III) LVD (2006/95/CE).
- Conformity to CE Standards: EN 301 489-3 EN 300 220-2 EN 60950-1 EN 60204-32 EN 13557 EN 61000-6-2 EN ISO 13849-1:2006
- Ambient temperature storage: -20°C/+70°C
- Ambient temperature operational: -20°C/+70°C
- Frequency:
433 MHz
870 MHz
418 MHz for China
- Hamming code: > 4
- Maximum no. of simultaneous on/off controls: 10
- Response time: 45 ms
- Active Emergency/Stop response time: 45 ms
- Passive Emergency response time: 1 s
- Operating range: 10 m
- Stop control classification: Category 3 PL-D
- Markings and homologations: CE
Description
Radio remote control with handheld transmitter with shoulder strap, suitable for cranes and bridge cranes. Ergonomic, compact and lightweight. Designed to reduce installation and maintenance time and costs.
Features
- Quick and easy installation: from the transmitter it is possible to change the frequency, visualizing it through the flashing led channel indicator, program automatic switch-off functions, enable low power start-up, program the auxiliary button functions to meet the operator’s needs.
- Transmitter equipped with high elasticity and resistance elastomer buttons.
- IP protection degree: Brick is classified IP65.
- Extreme temperature resistance: from -20°C to +70°C.
- Tough NYLON casing for protection against shocks and scraping, resistant to acids, oils and chemical agents.
- Designed with an ergonomic shaped base and anti-slip bars for a better grip.
- Automatic switch-off after 4 minutes inactivity.
- Standard version includes a digital key for higher reliability.
Options
- Available in configurations from 9 to 12 actuators, plus Start and Stop.
- Patented universal electromagnetic induction charging device: the batteries inside the transmitter are recharged by inductive energy transfer by simply placing the transmitter on its base. A 20 minute charge is enough for a typical working day.
- Receivers are available for mounting inside the electric panel (RX DIN) or in an IP65 watertight case for outdoor installation (RX RubyBox).
- Operational data storage by the receivers (working hours, total amount of start-ups and shut-downs, number of lift or movements); the display (on request) is available for the data visualization.
- Supplied with a sturdy and reliable waterproof antenna (UHF model) for the receiver mounted inside the electric panel (RX DIN) or with an internal antenna for the version with outdoor casing (RX RubyBox).
- Directional and high-gain antennas also available (Flat870 model).
CertificationS
- CE Marking.
- Performance Level Category 3 PL d.
- Performance Level Category 2 PL c.
Manufactured by RemDevice Srl – Distributed by TER Tecno Elettrica Ravasi srl
Via Garibaldi 29/31
23885 Calco (LC) - Italy
Tel. +39 039 9911011
Fax +39 039 9910445
E-mail info@ter.it
Via San Vigilio 2 - 23887 Olgiate Molgora (LC) - Italy
Capitale sociale / Capital stock € 150.000
R.E.A Lecco N. 136104 - M.I.C. 001225
Registro Imprese di Lecco / Business register in Lecco
C.F P.IVA / Fiscal Code/VAT no. 00222410136