ONLINE SHOP

Mike

You are in: Products Pendant control stations Mike

Technical characteristics

  • Conformity to Community Directives: 2014/35/UE 2006/42/CE
  • Conformity to Standards: EN 60204-1 EN 60947-1 EN 60947-5-1 EN 60947-5-5 EN 60529 ISO 13850
  • Regulations for the prevention of accidents BGV C 1 (only for Germany)
  • CSA-C22.2 No 14-13
  • UL 508
  • IEC 61508:2010 Part 2-4-6-7
  • Storage ambient temperature: -40C/+80C
  • Operational ambient temperature: -40C/+80C
  • IP Protection degree: IP 66 / IP 67 / IP 69K
  • IK Protection degree: IK08
  • NEMA protection degree: Type 1, 4 and 4X
  • Insulation category: Class II
  • Cable entry: rubber cable sleeve ( 826 mm)
  • Operating positions: any position
  • Mechanical life 1 speed pushbutton: 10x106 operations 2 speed pushbutton: 10x106 operations illuminated pushbutton: 10x106 operations
  • HALT test (data available on request)
  • Markings and homologations: CE cULus* SIL 1 EAC
  • Utilisation category: AC 15
  • Rated operational current: 3 A
  • Rated operational voltage: 250 Vac
  • Rated thermal current: 10 A
  • Rated insulation voltage: 300 Vac
  • Mechanical life: 10x106 operations
  • Connections: screw-type terminals
  • Wires: 2x0.5mm - 2x1.5 mm - 1x2.5 mm
  • Markings and homologations: CE cULus EAC
  • Electrical ratings PRSL1821PI: 110-240 Vac, 1.15-2.50 mA
  • Electrical ratings PRSL1820PI: 24-48 Vac/dc, 1.30-2.70 mA
  • Markings and homologations: CE cULus EAC

Technical characteristics

    General specifications
  • Conformity to Community Directives: 2014/35/UE 2006/42/CE
  • Conformity to Standards: EN 60204-1 EN 60947-1 EN 60947-5-1 EN 60947-5-5 EN 60529 ISO 13850
  • Regulations for the prevention of accidents BGV C 1 (only for Germany)
  • CSA-C22.2 No 14-13
  • UL 508
  • IEC 61508:2010 Part 2-4-6-7
  • Storage ambient temperature: -40C/+80C
  • Operational ambient temperature: -40C/+80C
  • IP Protection degree: IP 66 / IP 67 / IP 69K
  • IK Protection degree: IK08
  • NEMA protection degree: Type 1, 4 and 4X
  • Insulation category: Class II
  • Cable entry: rubber cable sleeve ( 826 mm)
  • Operating positions: any position
  • Mechanical life
    1 speed pushbutton: 10x106 operations
    2 speed pushbutton: 10x106 operations
    illuminated pushbutton: 10x106 operations
  • HALT test (data available on request)
  • Markings and homologations: CE cULus* SIL 1 EAC

    Specifications of the microswitches
  • Utilisation category: AC 15
  • Rated operational current: 3 A
  • Rated operational voltage: 250 Vac
  • Rated thermal current: 10 A
  • Rated insulation voltage: 300 Vac
  • Mechanical life: 10x106 operations
  • Connections: screw-type terminals
  • Wires: 2x0.5mm - 2x1.5 mm - 1x2.5 mm
  • Markings and homologations: CE cULus EAC

    Specifications of the LEDs
  • Electrical ratings PRSL1821PI: 110-240 Vac, 1.15-2.50 mA
  • Electrical ratings PRSL1820PI: 24-48 Vac/dc, 1.30-2.70 mA
  • Markings and homologations: CE cULus EAC

Description

Pendant station for auxiliary control of modern ergonomic shape, easy to handle, user friendly and sturdy.
Mike is the result of careful analysis of ergonomic aspects and it is rich in high-performing features to suit the most demanding requirements.
Features
- Reduced installation and wiring time and costs: the cable inlet and the switches fitted in the base of the control station are separated from the actuators, installed on the cover.
- Innovative suspension system with concealed cables to enable rapid, correct, ergonomic installation.
- Rubber pushbuttons with symbol disks to ensure protection against dust and prevent jamming when the control station is used in harsh environments.
- The emergency stop mushroom pushbutton complies with standard ISO 13850.
- Positive opening NC contacts for safety functions.
- Mechanical life of pushbuttons and switches: 10 million operations.
- IP protection degree: Mike is classified IP66, IP67 and IP69K.
- IK protection degree: Mike is classified IK08.
- NEMA protection degree: Mike is classified Type 1, 4 and 4X.
- Extreme temperature resistance: -40C to +80C.
- All materials and components used are wear resistant and guarantee protection of the unit against water and dust.
Options
- Available in configuration from 4 to 15 actuators.
- Available with specific protection for actuators mounted on the bottom of the control station.
1NO or 1NC switches, LEDs voltage 24/48 Vac/dc or 110/230 Vac, and potentiometers.
- Mechanical interlock to prevent simultaneous operation of opposite functions.
- Wide range of actuators in different colours: one or two speed pushbuttons, selector switches and key-selector switches in various operation configurations, pilot lights, impulse or latched mushroom pushbuttons with rotation or key-operated release.
- One speed pushbuttons and selector switches available in illuminated version in a range of colours.
- Available with labels (symbols and lettering) to be applied next to the actuators or with pushbuttons with two-colour moulded permanent symbols.
Certifications
- CE marking, cULus* marking and EAC certification.
- Mike is available, upon request, with the SIL1 certification (Safety Integrity Level 1), according to Standard IEC61508.
- Complies with accident prevention regulation BGV C 1 (only for Germany).


* Not available on all versions.

Configure your pendant control station

Model
TER Tecno Elettrica Ravasi srl
Manufactured by: TER Tecno Elettrica Ravasi srl
Model: Pendant control stations Mike
Product ID: 136
TER Tecno Elettrica Ravasi srl
Sede Operativa / Headquarter
Via Garibaldi 29/31
23885 Calco (LC) - Italy
Tel. +39 039 9911011
Fax +39 039 9910445
E-mail info@ter.it
Sede Legale / Registered Office
Via San Vigilio 2 - 23887 Olgiate Molgora (LC) - Italy
Capitale sociale / Capital stock € 150.000
R.E.A Lecco N. 136104 - M.I.C. 001225
Registro Imprese di Lecco / Business register in Lecco
C.F P.IVA / Fiscal Code/VAT no. 00222410136
Do you want receive TER news updates?